Custom Drone Parts
Lightweight, impact-resistant 3D printed components for UAVs. Motor mounts, camera housings, landing gear, and custom frames in carbon fiber and high-performance polymers. Optimise your manufacturing today.
Lightweight, Strong UAV Components
Every gram matters when your drone is carrying a payload. Partmade3D prints custom drone parts using carbon fiber reinforced nylon — delivering aluminium-level strength at a fraction of the weight. Our 3D printing services produce motor mounts, gimbal brackets, landing gear, antenna mounts, and custom frames that survive crashes and hard landings.
We serve drone manufacturers, aerial survey companies, agricultural UAV operators, and racing teams across Australia. From 3D printing Sydney to 3D printing Perth, 3D printing Melbourne to 3D printing Brisbane, we ship lightweight, flight-ready components nationwide. Upload your CAD files today for an instant cost and lead-time analysis.
Parts We Print for UAVs
Motor Mounts & Arms
Rigid, vibration-dampening motor mounts and multi-rotor arm assemblies. Replace cracked arms after crashes in hours, not days.
- Carbon fiber for max stiffness
- Motor bolt pattern custom fit
- Integrated wire routing
Camera & Gimbal Housings
Custom camera enclosures, gimbal brackets, and sensor mounts with vibration isolation and weather sealing.
- Shock-absorbing mounts
- Lens aperture cutouts
- Weather-seal grooves
Landing Gear & Skids
Collapsible, shock-absorbing landing gear and belly skid plates. Flexible TPU options for soft landings.
- Foldable / retractable designs
- TPU shock absorbers
- Quick-swap broken legs
Battery Trays & Mounts
Custom battery compartments for LiPo packs with retention straps, anti-vibration pads, and quick-release mechanisms.
- Any cell configuration
- Slide-in / click-lock mounts
- Balance lead cutouts
Antenna & GPS Mounts
Lightweight antenna masts, GPS puck holders, and telemetry module brackets with optimal signal clearance.
- 360 degree signal clearance
- Breakaway crash design
- SMA / RP-SMA thread fit
Custom Frames & Pods
Topology-optimised airframes, cargo pods, and specialised mission modules designed for your exact payload.
- Generative design optimisation
- Monocoque or truss designs
- Mounting points for all gear
Flight-Ready UAV Materials
Carbon Fiber Nylon
Ultimate strength-to-weight for structural frames, motor mounts, and load-bearing arms. Rigid and impact resistant.
PA12 Nylon
Impact and chemical resistant. Ideal for landing gear, skids, and parts that take a beating during crashes.
TPU
Shock-absorbing bumpers, grommets, vibration dampeners, and soft-touch camera isolation mounts.
ABS
Ultra-light, affordable option for fairings, covers, and non-structural housings. Easy to paint and finish.
PETG
UV and moisture resistant for outdoor flight. Great for antenna housings, GPS covers, and rain-resistant enclosures.
Polycarbonate
For components near motors or ESCs that run hot. Flame retardant options available for high-risk applications.
Drone Types We Support
Aerial Survey & Mapping
Lightweight camera gimbals, LiDAR mounts, and RTK GPS brackets for long-endurance survey missions.
Agriculture & Spraying
Tank mounts, nozzle brackets, boom arms, and chemical-resistant pump housings for crop spraying UAVs.
Racing & FPV
Ultra-lightweight frames, GoPro mounts, antenna protectors, and smash-proof camera cages for drone racers.
Search & Rescue
Payload drop mechanisms, loudspeaker mounts, thermal camera brackets, and searchlight housings.
Cinematography
Steady gimbal mounts, monitor brackets, follow-focus gears, and lens shade adapters for aerial filming.
Delivery & Logistics
Cargo bay mechanisms, parcel hooks, winch mounts, and release systems for last-mile delivery drones.
Why Carbon Fiber for Drones?
Carbon fiber reinforced nylon gives you aluminium-level stiffness at roughly half the weight. That means longer flight times, heavier payloads, and better manoeuvrability. When you crash, we can print a replacement arm or mount overnight and have it in your hands the next day.
Get Your Online 3D Printing Quote
Upload your CAD files today to get an instant cost and lead-time analysis for your custom drone parts. Talk to an engineer about material selection and design optimisation.